Extreme Networks ExtremeWare - Configure Vlan Add Track-Vlan

configure vlan add track-vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1077
configure vlan add track-vlan
configure vlan <vlan name> add track-vlan <vlan_tracked>
Description
Configures an ESRP-enabled VLAN or a VRRP VLAN to track port connectivity to a specified VLAN.
Syntax Description
Default
Disabled.
Usage Guidelines
If no active ports remain on the specified VLANs, the device automatically relinquishes master status
and remains in slave mode (for ESRP) or backup mode (for VRRP).
An ESRP or VRRP VLAN can track one VLAN.
This command can be used with both ESRP-enabled VLANs and VRRP VLANs.
Example
The following command enables ESRP-enabled VLAN esrp-1 to track port connectivity to VLAN
engineering:
configure vlan esrp-1 add track-vlan engineering
History
This command was first available in ExtremeWare 4.1.
Platform Availability
This command is available on all platforms.
vlan name Specifies an ESRP-enabled or VRRP VLAN name.
vlan_tracked Specifies the VLAN to be tracked.