show udp-profile
ExtremeWare Software 7.3.0 Command Reference Guide 1249
show udp-profile
show udp-profile {<profile_name>}
Description
Displays the UDP profile information.
Syntax Description
Default
N/A.
Usage Guidelines
Displays the following information:
• Profile names
• Input rules of UDP port, destination IP address, or VLAN
• Source VLANs to which the profile is applied.
Example
The following command displays the UDP profile information for the UPD profile named backbone:
show udp-profile backbone
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
profile_name Specifies a UDP profile name.
To Next Page
Loading...