configure flow-redirect service-check telnet
ExtremeWare Software 7.3.0 Command Reference Guide 449
configure flow-redirect service-check telnet
configure flow-redirect <flow redirect> service-check telnet user <user
name> <password>
Description
Configures the flow redirect Telnet check.
Syntax Description
Default
N/A.
Usage Guidelines
This command automatically enables Telnet check. The Telnet check logs in to each next hop specified
in the flow redirect policy with the user name and password specified.
For ExtremeWare 6.2.0 and prior, the frequency of the Telnet check is 60 seconds, the timeout of the
Telnet check is 180 seconds, and you cannot configure these times.
For ExtremeWare 6.2.1 and later, configure the frequency and timeout using the following command:
configure flow-redirect timer service-check
Example
The following command configures (and enables) Telnet check for the flow redirect policy named
“telnet_flow” and logs in with the user name “test” and the password “extreme”:
configure flow-redirect telnet_flow service-check telnet user test extreme
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
flow redirect Specifies a flow redirect policy.
user name Specifies the user name for logging in to the telnet service.
password Specifies the password for logging in to the telnet service.
To Next Page
Loading...
Need help?
General
