configure iparp max-pending-entries
ExtremeWare Software 7.3.0 Command Reference Guide 1159
configure iparp max-pending-entries
configure iparp max-pending-entries <number>
Description
Configures the maximum allowed incomplete IP ARP entries.
Syntax Description
Default
256.
Usage Guidelines
Range: 1 - 20480, but cannot be greater than the configured IP ARP max-entries value.
Example
The following command sets the maximum IP ARP entries to 500 entries:
configure iparp max-pending-entries 500
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
number Specifies a number of maximum IP ARP entries.
To Next Page
Loading...