show esrp vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1123
show esrp vlan
show esrp vlan <vlan name> {counters}
Description
Displays ESRP configuration information for a specific VLAN.
Syntax Description
Default
Displays summary ESRP and ELRP information for the VLAN.
Usage Guidelines
None.
Example
The following command displays ESRP status information for ESRP-enabled VLAN demo-esrp:
show esrp vlan demo-esrp
It produces output similar to the following:
VLAN Interface(Layer 2): demo_esrp
Priority: 0 (Priority In Use: 0)
Active Ports: 2
Internal Ports: 0
Tracked Rt/Ping/LSP: 0
Tracked Ports: 0
Tracked Diag: -
Tracked Env: -
Tracked RIP: -
Tracked OSPF: -
Tracked BGP: -
Tracked LSP: None
ELRP in Premaster(Int, Cnt):Enabled(1, 3)
ELRP in Master(Int): Enabled(1)
Election Algorithm: ports-track-priority-mac
Group: 0
Hello Timer: 2
Esrp Nbr Timeout: 6
Premaster Timeout: 6
State: Enabled(Slave) on Mon Jun 2 10:09:48 2003
State Trans Counters: ToMaster:(1) ToPremaster:(1) ToSlave:(2)
Host (Direct-Attach) ports : None
No-count ports: None
Restart Ports: None
vlan name Specifies an ESRP-enabled VLAN name.
counters Displays ESRP counters.
To Next Page
Loading...
Need help?
General
