Extreme Networks ExtremeWare - Enable Gvrp

enable gvrp
ExtremeWare Software 7.3.0 Command Reference Guide 343
enable gvrp
enable gvrp
Description
Enables the Generic VLAN Registration Protocol (GVRP).
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
The GVRP protocol allows switches to automatically discover some of the VLAN information that
would otherwise have to be manually configured in each switch.
GVRP must be enabled on individual ports before GVRP information will be sent or received.
By default, GVRP is enabled for both sending and receiving on all ports, so executing this command
will normally “turn on” GVRP functionality.
GVRP is not supported in ExtremeWare version 6.1 or later.
Example
The following command enables GVRP functionality:
enable gvrp
History
This command was first available in ExtremeWare 2.0.
This command exists but is not supported in ExtremeWare version 6.1 or later.
Platform Availability
This command is available on all platforms.