show snmpv3 counters
ExtremeWare Software 7.3.0 Command Reference Guide 201
show snmpv3 counters
show snmpv3 counters
Description
Displays SNMPv3 counters.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The
show snmpv3 counters
command displays the following SNMPv3 counters:
• snmpUnknownSecurityModels
• snmpInvalidMessages
• snmpUnknownPDUHandlers
• usmStatsUnsupportedSecLevels
• usmStatsNotInTimeWindows
• usmStatsUnknownUserNames
• usmStatsUnknownEngineIDs
• usmStatsWrongDigests
• usmStatsDecryptionErrors
Issuing the command
clear counters
will reset all counters to zero.
Example
The following command displays all the SNMPv3 counters.·
show snmpv3 counters
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...