show ipxsap
ExtremeWare Software 7.3.0 Command Reference Guide 1593
show ipxsap
show ipxsap {vlan <vlan name>}
Description
Displays the enable status of IPX/SAP for the VLAN, and its operational and administrative status
(including the GNS reply service). It also lists any identified IPX/SAP neighbors, SAP packet statistics,
and several other timer settings.
Syntax Description
Default
N/A.
Usage Guidelines
None.
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...