Extreme Networks ExtremeWare - Configure Mpls Health-Check Delete Mplsping

configure mpls health-check delete mplsping
ExtremeWare Software 7.3.0 Command Reference Guide 1771
configure mpls health-check delete mplsping
config mpls health-check delete mplsping [<ipaddress> | prefix
<ipaddress/masklength> | <host_name> | lsp <lsp_name> | all]
Description
Deletes an MPLS tunnel LSP service connectivity health-check.
Syntax Description
Default
N/A.
Usage Guidelines
The command deletes a MPLS tunnel LSP service connectivity health-check. Deleting a LSP
health-check, as specified by the
ipaddress or host_name parameter or the prefix or lsp keyword,
terminates and deletes the configured mplsping. If the all keyword is specified, all mplsping
health-checks are deleted.
Example
Needed
History
This command was first available in an ExtremeWare 7.3.
Platform Availability
This command is available on the BlackDiamond switch.
ipaddress Option for specifying the forwarding equivalance class (FEC).
ipaddress/masklength Option for specifying the FEC.
host_name Option for specifying the FEC. Must be able to be resolved to an IP address.
lsp_name Deletes the tunnel LSP health-check
all Deletes all mplsping health-checks.