Extreme Networks ExtremeWare - Show Radius

show radius
ExtremeWare Software 7.3.0 Command Reference Guide 931
show radius
show radius {<ipaddress>}
Description
Displays the current RADIUS client configuration and statistics.
Syntax Description
Default
N/A.
Usage Guidelines
The output from this command displays the status of the RADIUS and RADIUS accounting (enabled or
disabled) and the primary and secondary servers for RADIUS and RADIUS accounting.
Example
The following command displays the current RADIUS client configuration and statistics:
show radius
Following is the output from this command:
Radius: enabled
Radius Accounting: enabled
Radius Server Connect Timeout sec: 3
Primary radius server:
Server name: 172.17.1.123
IP address: 172.17.1.123
Server IP Port: 1645
Client address: 172.17.1.221
Shared secret:
Access Requests:0 Access Accepts:0 Access Rejects:0
Access Challenges:0 Access Retransmits:0 Client timeouts:0
Bad authenticators:0 Unknown types:0 Round Trip Time:0 sec(s)
Secondary radius server:
Server name: 172.17.1.123
IP address: 172.17.1.123
Server IP Port: 1645
Client address: 172.17.1.221
Shared secret:
Access Requests:3 Access Accepts:0 Access Rejects:0
Access Challenges:0 Access Retransmits:2 Client timeouts:0
Bad authenticators:0 Unknown types:0 Round Trip Time:0
Radius Acct Server Connect Timeout sec: 3
ipaddress Specifies the IP address of the RADIUS server (optional).