1836 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
show mpls interface
show mpls interface {ldp | targeted-ldp | rsvp-te}
Description
Displays targeted LDP and RSVP-TE interface information.
Syntax Description
Default
N/A.
Usage Guidelines
Displays targeted LDP and RSVP-TE interface information, including targeted LDP and RSVP-TE peer
IP address and peer state. Specifying the keyword
ldp
,
targeted-ldp,
or
rsvp-te
limits the
information displayed to only those interface types.
Example
The following command displays interface information for RSVP-TE interfaces:
show mpls interface rsvp-te
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
ldp Specifies LDP interfaces.
targeted-ldp Specifies targeted LDP interfaces.
RSVP-TE Specifies RSVP-TE interfaces.
To Next Page
Loading...