1558 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
configure ipxmaxhops
configure ipxmaxhops <number>
Description
Configures the IPX maximum hop count when forwarding IPX packets.
Syntax Description
Default
The default setting is 16.
Usage Guidelines
Change the default number only if NetWare Link Services Protocol (NLSP) is running in the IPX
network.
Example
The following command configures a maximum IPX hop count of
24
:
configure ipxmaxhops 24
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
number Specifies a hop count number.
To Next Page
Loading...