1594 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
show ipxservice
show ipxservice {vlan <vlan name> | xnetid <netid> _ origin [static | sap |
local]}
Description
Displays IPX services learned by way of SAP.
Syntax Description
Default
N/A.
Usage Guidelines
The service information is entered into the IPX Service Table in one of the following two ways:
• Dynamically, by way of SAP
• Statically, using the
configure ipxservice add
command
Example
The following command displays IPX/SAP service information for VLAN
accounting
:
show ipxservice vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
netid Specifies an IPX network number.
To Next Page
Loading...