configure mpls health-check delete vplsping
ExtremeWare Software 7.3.0 Command Reference Guide 1775
configure mpls health-check delete vplsping
config mpls health-check delete vplsping <vpls_name> [peer <ipaddress> |
mac-address <macaddress> | all]
Description
Deletes a VPLS VC-LSP service connectivity health-check.
Syntax Description
Default
N/A.
Usage Guidelines
The command deletes a VPLS VC-LSP service connectivity health-check. Deleting a VC-LSP
health-check, as specified by the
peer
or
mac-address
keyword, terminates and deletes the configured
vplsping. If the all keyword is specified, all vplsping health-checks for the specified
vpls_name
are
deleted.
Example
Needed
History
This command was first available in an ExtremeWare 7.3.
Platform Availability
This command is available on the BlackDiamond switch.
vpls_name Identifies the VPLS within the switch (character string)
ipaddress Option for specifying the health check.
mac-address Option for specifying the health check.
all Deletes all vplsping health-checks for the specified vpls_name.
To Next Page
Loading...
Need help?
General
