disable rip export
ExtremeWare Software 7.3.0 Command Reference Guide 1343
disable rip export
disable rip export [direct | isis | isis-level-1 | isis-level-1-external |
isis-level-2 | isis-level-2-external | ospf | ospf-extern1 | ospf-extern2 |
ospf-inter | ospf-intra | static | vip]
Description
Disables RIP from redistributing routes from other routing protocols.
Syntax Description
Default
Disabled.
Usage Guidelines
This command disables the exporting of static, direct, IS-IS, and OSPF-learned routes into the RIP
domain.
Example
The following command disables RIP from redistributing any routes learned from OSPF:
disable rip export ospf
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
direct Specifies interface routes (only interfaces that have IP forwarding enabled are
exported).
isis Specifies IS-IS routes.
isis-level-1 Specifies IS-IS level 1 routes.
isis-level-1-external Specifies IS-IS level 1 external routes.
isis-level-2 Specifies IS-IS level 2 routes.
isis-level-2-external Specifies IS-IS level 2 external routes.
ospf Specifies all OSPF routes.
ospf-extern1 Specifies OSPF external route type 1.
ospf-extern2 Specifies OSPF external route type 2.
ospf-inter Specifies OSPF-inter area routes.
ospf-intra Specifies OSPF-intra area routes.
static Specifies static routes.
vip Specifies VIP routes.
To Next Page
Loading...
Need help?
General
