Extreme Networks ExtremeWare User Manual

2168 ExtremeWare Software 7.3.0 Command Reference Guide
Troubleshooting Commands
configure debug-trace isis-hello
configure debug-trace isis-hello <level> vlan [<vlan name> | all]
Description
Controls logging of debug messages related to sending and receiving, and decoding and encoding of
Hello messages.
Syntax Description
Default
The default is 0.
Usage Guidelines
The debug level range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
the messages recorded at lower levels.
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
debug level Specifies a debug level. Following are the debug levels:
0 — Critical/Error Messages
1 — Warning Messages
2 — Concise Messages
3 — Verbose Messages
4 — Packet Dumps
vlan name Specifies a VLAN name.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English