Extreme Networks ExtremeWare User Manual

configure ports t1 linecoding
ExtremeWare Software 7.3.0 Command Reference Guide 1707
configure ports t1 linecoding
configure ports <portlist> t1 linecoding [b8zs | ami]
Description
Configures the linecoding convention for T1 links.
Syntax Description
Default
The default linecoding is B8ZS.
Usage Guidelines
The two choices for linecoding standards are bipolar eight zero suppression (B8ZS) or alternate mark
inversion (AMI).
Example
The following command sets the linecoding to AMI:
configure ports 2:3,2:4 t1 linecoding ami
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
portlist A list of ports.
b8zs Specifies B8ZS linecoding.
ami Specifies AMI linecoding.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English