delete isis area
ExtremeWare Software 7.3.0 Command Reference Guide 1329
delete isis area
delete isis area [<isis area identifier> | all]
Description
Deletes an IS-IS level 1 area.
Syntax Description
Default
N/A.
Usage Guidelines
Currently, only one level 1 area can be created.
The maximum length for an area identifier is 32 characters. The identifier must begin with one
alphabetic character followed by up to 31 alphabetic or numeric characters.
The
all
option deletes all of the level 1 areas simultaneously.
The level 1 area can only be deleted when no interface attaches to it.
Example
The following command deletes an IS-IS level 1 area:
delete isis area a1000
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
isis area identifier Specifies the area identifier.
To Next Page
Loading...