Extreme Networks ExtremeWare User Manual

create security-profile
ExtremeWare Software 7.3.0 Command Reference Guide 859
create security-profile
create security-profile <name> {copy <existing_profile>}
Description
Creates a new security profile.
Syntax Description
Default
Unsecure profile is the default, and it is applied to all wireless ports.
Usage Guidelines
Use this command to create a new profile or to copy an existing profile using a new name.
Example
The following example creates a new security-profile called wep-secure using an existing profile called
unsecure:
create security-profile wep-secure copy unsecure
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the name of the security profile being created.
existing_profile Specifies the name of an existing profile from which the system copies the
initial values.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English