show eaps summary
ExtremeWare Software 7.3.0 Command Reference Guide 997
show eaps summary
show eaps summary
Description
Displays summary information on one or more EAPS domains.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Displays EAPS domains and associated info such as Domain Name, Domain State, EAPS Mode,
Enabled State, Control VLAN and VLAN ID and the Number of Protect VLANs in the domain. This is
helpful when viewing the status info for large numbers of EAPS domains quickly.
Example
The following command displays summary EAPS information on a transit node:
show eaps summary
The results for this command are as follows:
EAPS Enabled: Yes
Number of EAPS instances: 3
EAPSD-Bridge links: 6
Pri Sec Vlan
Domain State Mo En Port Port Control-Vlan (VID) count
------------ ------------ -- -- ------- ------- -----------------------
eaps4 Links-Up T Y 1:1 1:4 cv4 (1004) 1
eaps3 Links-Up T Y 1:1 1:3 cv3 (1003) 1
eaps2 Links-Up T Y 1:1 1:2 cv2 (1002) 1
EAPS shared-port count: 1
Link Domain Vlan RB RB
Shared-port Mode Id Up State count count Nbr State Id
----------- ---------- ---- -- --------- ------ ----- --- ------- -----
1:1 Controller 2 Y Ready 3 1 Yes None None
EAPS Domain list: "eaps2" "eaps3" "eaps4"
To Next Page
Loading...
Need help?
General
