1688 ExtremeWare Software 7.3.0 Command Reference Guide
PoS Commands
show sonet
show sonet {<portlist>} {detail}
Description
Displays SONET port status.
Syntax Description
Default
By default, the command shows summarized status for the port(s).
Usage Guidelines
You can use the
portlist
parameter to specify which SONET port(s) you want to display the status for.
You can also omit the
portlist
parameter to obtain status for all SONET ports. More detailed status
information can be obtained for the port(s) by specifying the detail parameter. Summary status includes
the following information for each port:
• Values of all port configuration parameters
• State of the port
• Identification of all currently active events
Example
The following command displays the SONET port status:
show sonet
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
portlist Specifies the port number(s).
detail Displays more detailed status information for the ports.
To Next Page
Loading...