show ppp
ExtremeWare Software 7.3.0 Command Reference Guide 1687
— remote username (if applicable)
— CHAP/PAP packet counters
• Detailed IPCP/BCP status
— options negotiated (local and remote)
— packet counters
— MPLSCP/OSINLCP status
• Detailed LQM status
— statistics from last received LQR (Link Quality Report)
— time since last received LQR
— LQR packet counters
— number of link-down events due to LQM
— MPLSCP
— OSINLCP
Example
The following command displays status information for the PPP ports:
show ppp
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only. A similar command is available on the
Alpine switch.
To Next Page
Loading...