disable bgp neighbor
ExtremeWare Software 7.3.0 Command Reference Guide 1457
disable bgp neighbor
disable bgp neighbor [<ip address> | all]
Description
Disables the BGP session.
Syntax Description
Default
Disabled.
Usage Guidelines
After the session has been disabled, all the information in the route information base (RIB) for the
neighbor is flushed.
Example
The following command disables the BGP session:
disable bgp neighbor 192.1.1.17
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ip address Specifies an IP address.
all Specifies all neighbors.
To Next Page
Loading...