2048 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
disable wireless ports interface client-scan
disable wireless ports <portlist> interface [1 | 2] client-scan
Description
Disables the client scan feature on the specified wireless interface.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to disable the client scan feature on the specified wireless interface. Disabling the
feature can improve performance if the network is heavily populated and beginning to show
degradation.
Example
The following command disables port 1:31 and interface 2:
disable wireless ports 1:31 interface 2 client-scan
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
To Next Page
Loading...