192 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
show snmpv3 engine-info
show snmpv3 engine-info
Description
Displays information about the SNMPv3 engine on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines:
The following show engine-info output is displayed:
• EngineID—Either the ID auto generated from MAC address of switch, or the ID manually
configured.
• EngineBoots—Number of times the agent has been rebooted.
• EngineTime—Time since agent last rebooted, in centiseconds.
• Max. Message Size—Maximum SNMP Message size supported by the Engine (8192).
Example
The following command displays information about the SNMPv3 engine on the switch:
show snmpv3 engine-info
The following is output from this command:
SNMP Engine-ID : 80:00:07:7c:03:00:01:30:23:c1:00 'H'
SNMP Engine Boots : 4
SNMP Engine Time : 1852673
SNMP Max. Message Size : 8192
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...