200 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
show snmpv3 access
show snmpv3 access {{hex} <group name>}
Description
Displays SNMPv3 access rights.
Syntax Description
Default
N/A.
Usage Guidelines
The
show snmpv3 access
command displays the access rights of a group. If you do not specify a
group name, the command will display details for all the groups.
This command displays the SNMPv3 VACMAccessTable entries.
Example
The following command displays all the access details.·
show snmpv3 access
The following command displays the access rights for the group group1:
show snmpv3 access group1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
group name Specifies the name of the group to display.
To Next Page
Loading...