unconfigure pim
ExtremeWare Software 7.3.0 Command Reference Guide 1555
unconfigure pim
unconfigure pim {vlan <vlan name>}
Description
Resets all PIM settings on one or all VLANs to their default values.
Syntax Description
Default
If no VLAN is specified, the configuration is reset for all PIM interfaces.
Usage Guidelines
None.
Example
The following command resets all PIM settings on the VLAN accounting:
unconfigure pim vlan accounting
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...