446 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
configure flow-redirect service-check ping
configure flow-redirect <flow redirect> service-check ping
Description
Configures the flow redirect ping check.
Syntax Description
Default
N/A.
Usage Guidelines
This command automatically enables ping check.
Ping check is also automatically enabled when you add a next hop using the following command:
configure flow-redirect add next-hop
In ExtremeWare 6.2.0 and prior, the frequency of the ping check is 10 seconds, the timeout of the ping
check is 30 seconds, and you cannot configure these times.
For ExtremeWare 6.2.1 and later, configure the frequency and timeout using the following command:
configure flow-redirect timer ping-check
Example
The following command configures (and enables) ping check for the flow redirect policy named
“http_flow”:
configure flow-redirect http_flow service-check ping
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
flow redirect Specifies a flow redirect policy.
To Next Page
Loading...