Extreme Networks ExtremeWare - Clear Inline-Power Fault Ports

clear inline-power fault ports
ExtremeWare Software 7.3.0 Command Reference Guide 1901
clear inline-power fault ports
clear inline-power fault ports <portlist>
Description
Clears the fault condition on the specified ports.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command clears the fault condition for port 3:
clear inline-power fault ports 3
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.