enable inline-power
ExtremeWare Software 7.3.0 Command Reference Guide 1915
enable inline-power
enable inline-power
Description
Enables power currently provided on all ports on all slots.
Syntax Description
This command has no arguments or variables.
Default
Enable.
Usage Guidelines
You can control whether inline power is provided to the system by using the disable inline-power
command and the enable inline-power command. Using the
enable inline-power
command makes
power available on all ports on all slots. Using the
disable inline-power
command shuts down
power currently provided on all ports on all slots. By default, inline power provided to the system is
enabled.
Example
The following command enables power currently provided on all ports on all slots:
enable inline-power
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
To Next Page
Loading...