1510 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
configure pim crp timer
configure pim crp timer <crp advertisement interval>
Description
Configures the candidate rendezvous point advertising interval for PIM sparse mode operation.
Syntax Description
Default
The default is 60 seconds.
Usage Guidelines
None.
Example
The following command configures the candidate rendezvous point advertising interval to 120 seconds:
configure pim crp timer 120
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
crp advertisement interval Specifies a candidate rendezvous point advertising interval in seconds.
To Next Page
Loading...