824 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure security-profile wep key delete
configure security-profile <name> wep key delete <integer>
Description
Deletes the specified WEP key.
Syntax Description
Default
Zero (0).
Usage Guidelines
When you delete a WEP key whose index is the default WEP key index, then the default index is
changed automatically to the lowest specified WEP key (or N/A if no WEP keys have been specified).
Configuration changes take effect immediately and are propagated to all ports sharing the named
profile. If the command fails, none of the changes is propagated to any of the ports.
Examples
The following example deletes the first WEP key (0).
configure security-profile wep-secure wep key delete 0
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the names of the security profile.
integer Specifies the numeric value identifying the WEP key.
To Next Page
Loading...