Extreme Networks ExtremeWare - Configure Snmpv3 Add Community

configure snmpv3 add community
ExtremeWare Software 7.3.0 Command Reference Guide 127
configure snmpv3 add community
configure snmpv3 add community {hex} <community index> name {hex}
<community name> user {hex} <user name> {tag {hex} <transport tag>}
{volatile}
Description
Add an SNMPv3 community entry.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to create or modify an SMMPv3 community in the community MIB.
Example
Use the following command to create an entry with the community index comm_index, community
name comm_public, and user (security) name v1v2c_user:
configure snmpv3 add community comm_index name comm_public user v1v2c_user
Use the following command to create an entry with the community index (hex) of 4:E, community name
(hex) of EA:12:CD:CF:AB:11:3C, user (security) name v1v2c_user, using transport tag 34872 and
volatile
storage:
configure snmpv3 add community hex 4:E name hex EA:12:CD:CF:AB:11:3C user v1v2c_user
tag 34872 volatile
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
community index Specifies the row index in the snmpCommunityTable
community name Specifies the community name.
user name Specifies the USM user name.
transport tag Specifies the tag used to locate transport endpoints in SnmpTargetAddrTable.
When this community entry is used to authenticate v1/v2c messages, this tag
is used to verify the authenticity of the remote entity.
volatile Specifies volatile storage.