984 ExtremeWare Software 7.3.0 Command Reference Guide
EAPS Commands
create eaps
create eaps <name>
Description
Creates an EAPS domain with the specified name.
Syntax Description
Default
N/A.
Usage Guidelines
The
name
parameter is a character string of up to 32 characters that identifies the EAPS domain to be
created. EAPS domain names and VLAN names must be unique: Do not use the same name string to
identify both an EAPS domain and a VLAN.
Example
The following command creates EAPS domain eaps_1 on an “i” series switch:
create eaps eaps-1
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the “i” series platforms.
name Specifies the name of an EAPS domain to be created. May be up to 32
characters in length.
To Next Page
Loading...
Need help?
General
