Extreme Networks ExtremeWare - Enable Wireless Ports Interface

2054 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
enable wireless ports interface
enable wireless ports <portlist> interface [1 | 2]
Description
Enables the specified port interface.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command for per interface enabling.
Example
The following command enables port 1:35 and interface 1:
enable wireless ports 1:35 interface 1
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.