1598 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
unconfigure vlan xnetid
unconfigure vlan <vlan name> xnetid
Description
Removes the IPX NetID of a VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command removes the IPX NetID of VLAN
accounting
:
unconfigure vlan accounting xnetid
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...