1996 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
configure rf-profile beacon-interval
configure rf-profile <name> beacon-interval <value>
Description
Specifies the frequency interval of the beacon in milliseconds.
Syntax Description
Default
40 ms.
Usage Guidelines
A beacon is a packet that is broadcast by the Altitude 300 wireless port to synchronize the wireless
network. The beacon-interval is the time in milliseconds between beacons.
Examples
The following command sets the beacon interval to 100 ms:
configure rf-profile rfprof1 beacon-interval 100
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the name of the RF profile.
value Specifies the interval of the beacon in milliseconds. Valid values are from 20
to 1000. The default value is 40 ms.
To Next Page
Loading...