enable rip splithorizon
ExtremeWare Software 7.3.0 Command Reference Guide 1375
enable rip splithorizon
enable rip splithorizon
Description
Enables the split horizon algorithm for RIP.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the
router from which the route was learned. Split horizon omits routes learned from a neighbor in updates
sent to that neighbor.
Example
The following command enables the split horizon algorithm for RIP:
enable rip splithorizon
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...