restart ports
ExtremeWare Software 7.3.0 Command Reference Guide 279
restart ports
restart ports [<portlist>
Description
Resets autonegotiation for one or more ports by resetting the physical link.
For PoS modules, causes the PPP link to be renegotiated.
Syntax Description
Default
N/A.
Usage Guidelines
On a modular switch,
<portlist>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see
“Modular Switch
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1.
Example
The following command resets autonegotiation on port 4 on a stand-alone switch:
restart ports 4
The following command resets autonegotiation on slot 1, port 4 on a modular switch:
restart ports 1:4
History
This command was first available in ExtremeWare 4.0.
This command was modified in ExtremeWare 6.1 to support PoS modules.
This command was modified by removing the
mgmt
option in ExtremeWare 6.22.
Platform Availability
This command is available on all platforms.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
To Next Page
Loading...