1884 ExtremeWare Software 7.3.0 Command Reference Guide
High Density Gigabit Ethernet Commands
show application examination
show {application examination} {<application name>}
Description
Displays configured application examination rules.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays previously configured application examination rules. The keywords
“application examination” are optional. If an application examination rule is not specified, all created
rules will be displayed.
Example
The following command displays all configured application examination rules:
show application examination TCP20
Following is sample output from this command:
IP TCP/UDP
Name Typ Prt Port Match Q Prec Ports
============ === === ===== ====== ==== ====== ==================================
TCP20 tcp 6 20 dst IQP3 100 4:1, 4:2, 4:3, 4:4, 4:5, 4:6
4:7, 4:8, 4:9, 4:10, 4:11, 4:12
4:13, 4:14, 4:15, 4:16, 4:17, 4:18
4:19, 4:20, 4:21, 4:22, 4:23, 4:24
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on
“3”
series I/O modules only.
application name Specifies the name string associated with the application examination rule.
To Next Page
Loading...