608 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
clear log diag error
clear log diag error <slot number>
Description
Clears the Alpine diagnostics failures from the NVRAM.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command only at the direction of Extreme Networks personnel. Extreme Networks support
personnel can clear the Alpine diagnostics failures from the NVRAM using the following command:
clear log diag error <slot number>
Example
The following command clears the Alpine diagnostics failures from the NVRAM for the module in
slot
4:
clear log diag remap 4
History
This command was first available in ExtremeWare 7.2.0b25.
Platform Availability
This command is available on all platforms.
slot number Specifies the slot where the I/O module is installed.
To Next Page
Loading...