show eaps shared-port
ExtremeWare Software 7.3.0 Command Reference Guide 995
show eaps shared-port
show eaps shared-port [detail]
Description
Displays shared-port information for one or more EAPS domains.
Syntax Description
Default
N/A.
Usage Guidelines
If you enter the
show eaps shared-port
command without an argument or keyword, the command
displays a summary of status information for all configured EAPS shared ports. You can use the
detail
keyword to display more detailed status information about the segments and VLANs associated with
each shared port.
The fields displayed are as follows:
detail Specifies to display the status of all segments and VLANs.
Field Description
Shared Port Displays the port number of the shared port.
Mode Indicates whether the switch on either end of the common link is a
controller or partner. The mode is configured by the user.
Link ID The link ID configured by the user.
Up Displays one of the following:
• Yes—indicates that the link ID and the mode are configured.
• No—indicates that the link ID or the mode is not configured.
State Displays one of the following states:
• Idle—Shared-port instance is not running.
• Ready—The EAPS domain is running, the neighbor can be reached,
and the common link is up.
• Blocking—The EAPS domain is running, the neighbor cannot be
reached, or the common link is down.
• Preforwarding—The EAPS domain was in a blocking state, and the
common link came up. To prevent a superloop, a temporary blocking
state is created before going into Ready state.
Domain Count • Indicates the number of EAPS domains sharing the common link.
VLAN Count • Indicates the total number of VLANs that are protected under the
EAPS domains sharing this common link.
To Next Page
Loading...
Need help?
General
