2092 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
show wireless ports interface client-scan results
mac-address
show wireless ports [<portlist> | all] interface [1 | 2] client-scan
results <mac_address>
Description
Displays the details about the specified client MAC address.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to check details about the clients in the client scan table.
Example
The following example shows the details of client MAC address 00:03:7F:BE:FE:9D.
show wireless port 5 interface 1 client-scan results 00:03:7F:BE:FE:9D
It produces output similar to the following:
Intf Source Probe REQs Last RSS Channel Last SeenClient
================================================================================
5:1 00:03:7F:BE:FE:9D 17 4 161 01:39:48 N
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
To Next Page
Loading...
Need help?
General
