Extreme Networks ExtremeWare User Manual

disable loopback-mode vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1207
disable loopback-mode vlan
disable loopback-mode vlan [<vlan name> | all]
Description
Disallows a VLAN to be placed in the UP state without an external active port. This allows (disallows)
the VLANs routing interface to become active.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to specify a stable interface as a source interface for routing protocols. This decreases
the possibility of route flapping, which can disrupt connectivity.
Example
The following command disallows the VLAN accounting to be placed in the UP state without an
external active port:
disable loopback-mode vlan accounting
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
all Specifies all VLANs.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English