Extreme Networks ExtremeWare User Manual

1366 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
enable ospf originate-router-id
enable ospf originate-router-id
Description
Enables distribution of a route for the OSPF router ID in the router LSA.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
When this function is enabled, OSPF includes a link with the router ID IP address and a mask of
255.255.255.255 in the router LSA. The link type is stub and the metric is 0.
When disabled, OSPF does not include a link with the router ID IP address in the router LSA
Example
The following command enables the distribution of a route for the OSPF router ID in the router LSA:
enable ospf originate-router-id
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
Platform Availability
This command is available on the BlackDiamond switch only.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English