Extreme Networks ExtremeWare User Manual

unconfigure elrp-client
ExtremeWare Software 7.3.0 Command Reference Guide 1125
unconfigure elrp-client
unconfigure elrp-client <vlan name>
Description
Disables a pending one-shot or periodic ELRP request for the specified VLAN.
Syntax Description
Default
None.
Usage Guidelines
This command disables a pending one-shot or periodic ELRP request for the specified VLAN.
Use the configure elrp-client one-shot command to configure non-periodic, one-time
transmission of ELRP packets. Use the
configure elrp-client periodic command to configure
periodic transmission of ELRP packets.
The ELRP client must be enabled globally in order for it to work on any VLANs. Use the enable
elrp-client
command to globally enable the ELRP client.
The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use
the
disable elrp-client command to globally disable the ELRP client.
Example
The following command disables a pending ELRP request on VLAN elrp1:
unconfigure elrp-client elrp1
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English