disable snmp traps exceed-committed-rate ports
ExtremeWare Software 7.3.0 Command Reference Guide 165
disable snmp traps exceed-committed-rate ports
disable snmp traps exceed-committed-rate ports <portlist> {<Ingress QOS
Profile>}
Description
Prevents SNMP traps from being sent from the indicated ports on the switch.
Syntax Description
Default
Disabled.
Usage Guidelines
To see which ports have such traps enabled, use the
show config
command.
Example
The following command will prevent SNMP exceed-committed-rate traps from being sent for all ingress
QOS profiles on ports 2:5 through 2:8.
disable snmp traps exceed-committed-rate ports 2:5-2:8
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on
“3”
series I/O modules only.
portlist Specifies a list of
“3”
series I/O module ports (in the form 2:*, 2:5, or 2:6-2:8).
Ingress QOS Profile Specifies an optional ingress QOS profile. If not specified, all ingress QOS
profiles for the indicated ports will be affected.
To Next Page
Loading...
Need help?
General
