disable snmp traps mac-security
ExtremeWare Software 7.3.0 Command Reference Guide 167
disable snmp traps mac-security
disable snmp traps mac-security
Description
Prevents SNMP mac-security traps from being sent from the switch for all ports.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command should be used in conjunction with the configure ports <portlist> limit-learning command.
That command configures a limit on the number of MAC addresses that can be learned on a port(s).
After that limit has been reached on a particular port, a trap will be sent by the switch, if a new MAC
address appears on that port. In addition, a message will be generated in the syslog and the port will be
blackholed.
Example
The following command prevents SNMP mac-security traps from being sent from the switch.
disable snmp traps mac-security
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...