Extreme Networks ExtremeWare - Show Diagnostics

show diagnostics
ExtremeWare Software 7.3.0 Command Reference Guide 2217
show diagnostics
show diagnostics {slot [<slot number> | msm-a | msm-b]}
Description
Displays the status of the system health checker as well as information from the last diagnostic test run
on the switch.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display the status of the system health checker as well as information from the
last diagnostic test run on the switch. The switch diagnostics are displayed in a tabular format with the
day, month, date, year, and time of the diagnostic test at the top of the table.
To run diagnostics on a I/O module or MSM, use the following command:
run diagnostics [extended | normal] slot [msm-a | msm-b | <slot number>]
Depending on the software version running on your switch or the model of your switch, additional or
different diagnostics information might be displayed.
Example
The following command displays the results of module diagnostics for the MSM in slot B:
slot number Specifies the slot number of an I/O module.
msm-a | msm- b Specifies the MSM.
Table 36: Show Diagnostics Command Field Definitions
Field Definitions
System Platform Specifies system type.
System Part No. Specifies system part number, revision level, and serial number.
Main Board No. Specifies main board part number, revision level, and serial number.
MAC Address Specifies system MAC address.
Slot Specifies the slot for which the results are displayed.
CPU System Indicates diagnostic results.
Registers Test Indicates diagnostic results.
Memory Test Indicates diagnostic results.
System Test Indicates diagnostic results.