526 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
disable slb
disable slb
Description
Disables SLB processing.
Syntax Description
This command has no arguments or variables.
Default
SLB is disabled by default.
Usage Guidelines
Disabling SLB causes the following to occur:
• Closes all connections.
• Withdraws virtual server routes or routes that do not respond with proxy ARP responses of virtual
server addresses.
• Disconnects the switch from redundant SLB switches.
To enable SLB, use the following command:
enable slb
Example
The following command disables SLB:
disable slb
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
